- Veteran Owned & Operated
- Serving Kansas City Metro
- 24/7 Emergency Service
- Call Now: (816) 317-0061
We inspect your electrical panel to ensure it can accommodate a surge protection device.
We recommend a high-quality surge protector rated for your home's needs (typically 50kA - 80kA).
We hardwire the device directly to your panel for maximum performance and grounding.
We verify the device is active and protecting your system.
On a typical job, the electrician starts by opening the panel cover and checking the panel’s brand, amperage, and available breaker space, since the surge protector needs a compatible connection point. Depending on the panel, that connection is either a dedicated two-pole breaker or a direct tie-in at the bus bar. Once wired in, the unit is secured to the panel or mounted just outside it, and the main breaker is switched back on. The electrician tests the device to confirm the indicator light is active, walks through what a tripped or failed light means, and checks a few outlets and appliances to confirm power was restored correctly. Most homeowners can expect the panel area to be the only part of the house touched during the visit.
Homes throughout the Kansas City metro can get whole-home surge protection installed regardless of which side of the state line they sit on, though the permitting authority differs by location. Jackson, Clay, and Platte County jurisdictions handle permitting and inspection on the Missouri side, and Kansas-side cities inspect separately through their own building departments. Panel-level work like a whole-home surge protector typically falls under electrical permitting rules, so it is worth confirming what your city or county requires before the panel is opened. The metro’s housing stock ranges from older homes with fuse-era wiring since upgraded to breaker panels, to newer subdivisions built to current code, and panel age affects how surge protection gets added. When a surge is tied to utility-side switching or a nearby strike, coordinating with Evergy can help confirm what happened on the utility side.
In most cases, no, your panel will not need to be replaced before whole-home surge protection is added. Modern panels can accept a whole-home surge protector through a dedicated breaker or a direct tie-in point. Older panels with limited breaker space or outdated components sometimes need a minor upgrade first, which an electrician can confirm during a free estimate.
Yes, the power to your home is shut off at the main breaker while the surge protector is connected, since the work happens directly inside the panel. This is a standard safety step for panel-level work, not a sign of a bigger problem. Your electrician will let you know before power is restored.
Yes, a whole-home surge protector does not require rewiring anything beyond the panel itself. It ties into your existing electrical service and monitors every circuit from that single connection point. The rest of your home’s wiring stays untouched.
Yes, a whole-home surge protector can help guard against surges introduced by backup generators, solar inverters, or battery systems tied into your electrical panel. Any equipment connected to your panel is a potential surge source, not just the utility line. Tell your electrician about any generator, solar, or battery equipment so the protector is sized and placed correctly.
Rebate availability for whole-home surge protection varies, so it is worth checking directly with Evergy for any current programs. Utility rebates change over time and are outside our control. We can provide documentation of the installation if a rebate program requires proof of the work.
Veteran Electric installs whole-house surge protectors throughout the Kansas City metro, working out of our shop in North Kansas City, Missouri. We serve homes on both sides of the state line, from the initial panel evaluation through final installation. Call (816) 317-0061 to schedule a free estimate.
